|
|
Item #539 - Ballast Lamp (18 volt, 0.15 Amps, 2/pack). May also be used to
illuminate buildings, great with 16 volt input voltage from transformer item #390 or 393.
Uses Item #548 bayonet base. |
|
|
Item #548 - Bayonet Base for #539 & others. This base is fully insulated
from themounting bracket!
|
|
|
Item #538 - Ballast Lamp Assembly. Includes one lamp and bayonet base (items
#539 & #548) |
|
Item #532 - T1 Red LED
LED INSTRUCTIONS (PDF file) |
|
Item #533 - T1 Yellow LED
LED INSTRUCTIONS (PDF file) |
|
Item #534 - T1 Green LED
LED INSTRUCTIONS (PDF file) |
 |
Item #536 - T1 (3mm) Incandescent White LED (color temp. of a light bulb). Super Bright output 3000 M.S.C.P. @ 20ma. typical. 30 degree viewing angle.
WHITE LED INSTRUCTIONS #536 (PDF file) |
|
Item #542 - Spedial Shape Red LED. Use for engine and caboose marker lights. Front nib measures 0.079" dia. x 0.14" length, main body measures 0.196" dia x 0.177" long.
|
 |
Item #593 - DUAL COLOR RED/GREEN LED with common Anode (+). Use for classification lights and other applicatoins. T1 (3mm) case size. |
|
Item #383 - 2.7 volt, 60 mA, miniature lamp. Replacement lamps for regulated lighting units and other uses. (0.225" dia x 0.51" h, bright output of 0.040 M.S.C.P., 6000 hour typical life. Physical attributes are typical and may vary) |
SPECIAL NOTE REGARDING ALL OF OUR LED LAMPS
All LED's require an appropriate limiting resistor for the voltage applied. They cannot be reverse biased (i.e., place a voltage reverse of the proper polarity) or they will burn out. To prevent reverse polarity problems either place a diode or bridge rectifier in the power path. Wiring diagrams are shown on our web site. See price schedule or web site for appropriate resistors, diodes, and bridge rectifiers. Various wiring diagram's are shown with the LED's package
|
