Log In | Cart
2.0" x 3.5", 8 ohm, oval speaker, 5W - 7W Peak - Dallee Electronics

2.0" x 3.5", 8 ohm, oval speaker, 5W - 7W Peak

Item Number: #667
  • 90 dB
  • 200Hz - 20kHz
  • 2.0" x 3.5" x 1.7" (Depth)

Power rating: 5 watt nominal, 7 watts peak

Give your train the best in sound by installing a compatible HiLine™ speaker with your HiLine™ sound system. This speaker is best suited for O and larger scales.

Installation Instructions

  1. Solder a two pin connector harness to the pads on the back of the speaker. (Two pin connectors are included with all HiLine™ sound system but can also be purchased separately)
  2. Create an enclosure for the speaker. This is best done with thick cardboard or plastic. Typically a circular hole is cut from cardboard and the edges of the speaker are glued to the cardboard so that the outside of the cone shows through the hole. Then the cardboard is cut to fit within the locomotive and glued in place.
  3. Connect the two pin harness to the speaker output of the sound system. (See your sound system instructions as the ports vary between systems)

Technical Specifications

Item Number 667
System Compatibility This speaker is fully compatible with all HiLine™ sound systems as well as any prior Dallee sound system.
Power Handling (RMS) 7 Watt
Sound Intensity 90 dB
Frequency Response 200 Hz - 20 kHz
Impedance 8 Ohm
Diaphragm Material Paper
Physical Dimensions 2.0 Inches x 3.5 Inches x 1.7 Inches Depth

All Content Copyright © 1976-2024 Dallee Electronics, Inc.

Privacy Policy and Conditions