2" Round 8 Ohm Speaker - NLA, use item #233
Item Number: #660
- 85 dB
- 100Hz - 5kHz
- 2.0" Diameter x 1.1875" Depth
No longer available, use item #233.
Details left for reference only.
Power rating: 3 watt nominal, 5 watts peak
Give your train the best in sound by installing a compatible HiLine™ speaker with your HiLine™ sound system. This speaker is a high performer and has an excellent low frequency response, best suited for deep sounding diesel locomotives. This speaker is best suited for O, G gauge trains.
Solder a two pin connector harness to the pads on the back of the speaker. (Two pin connectors are included with all HiLine™ sound system but can also be purchased separately)
Create an enclosure for the speaker. This is best done with thick cardboard or plastic. Typically a circular hole is cut from cardboard and the edges of the speaker are glued to the cardboard so that the
outside of the cone shows through the hole. Then the cardboard is cut to fit within the locomotive and glued in place.
Connect the two pin harness to the speaker output of the sound system. (See your sound system instructions as the ports vary between systems)
This speaker is fully compatible with all HiLine™ sound systems as well as any prior Dallee sound system.
|Power Handling (RMS)
||100 Hz - 5 kHz
||1.1875 Inches Deep x 2.0 Inches Diameter