Quickly and easily add one or many station stops to your layout. This unit contains all that is needed to add timed stops along your track. Similar to #683 but this kit includes a momentum start and stop to slowly bring your train to a stop and then slowly pull it out after the time-out.
Installation is easy, simply isolate one or more sections of track where the train should stop and reroute one power wire though the orange loop on the TRAK-DTT2 (included). Next, route power to the track through the TRAK-DTT2 terminals (more details can be found in instructions below or in the box). Power up the system and watch your trains automatically stop when they reach your isolated track section and then automatically restart after the time-out.
Stop duration can easily be set from 1 to 45 seconds by twisting the time duration knob on the TRAK-DTT2. Acceleration and deceleration speed can also be set from 1 to 45 seconds.
Automatic Timed Station Stops with Momentum #686 Full Instructions
How-To Guide: Alternating Timed Station Stops
|Stop Duration||Any value from 1 to 45 seconds.|
|Included in Box||
|System Compatibility||Operates with DC or AC track power. Train power supply/transformer not included. You supply the track, trolley car or locomotive, wire, and connections to components.|