Log In | Cart
E-Unit Lockout Switch, Toggle - Dallee Electronics

E-Unit Lockout Switch, Toggle

Item Number: #517
  • Locks E-Unit's in the "startup" positoin to prevent sequencing

This switch complements any Dallee E-Unit (518, 400, 1400) allowing the E-Unit to be locked in it's start position (Forward or Neutral as set by the jumper on the E-Unit).

Installation Instructions

  1. Drill a 7/32" hole on an external wall of the locomotive.
  2. Remove the nut and washer from the switch.
  3. Insert the switch in the hole and replace the washer and nut, tightening securely.
  4. Connect the two pin harness to the "LOCK" socket on the E-Unit.

Technical Specifications

Item Number 517
System Compatibility
Internal Switch Dimensions 0.5" x 0.25" x 0.5"
Switch Hole Size 7/32"
Included Wire Length 6 Inches

All Content Copyright © 1976-2024 Dallee Electronics, Inc.

Privacy Policy and Conditions