Log In | Cart
Dallee Diesel Auto Sound

Diesel Sound Systems with the 'G' Operator in Mind

Automated Horn & Bell Play Patterns

These DIESEL LOCOMOTIVE SOUND SYSTEM's were designed for the model railroader utilizing magnetic trips of the Horn and Bell. Each activation of the Horn triggers a different prototypical play pattern of the Diesel Locomotive's Horn. The Bell activates by tripping the Bell to play. The second trip will signal the Bell to turn off. Horn triggers can occur during Bell triggers as well. This system can operate from track power and/or battery power. It will automatically adjust the diesel prime mover rpm with changes in track or motor voltage. Sounds produced are explained for the standard DC diesel sound systems, Dallee Catalog, page 10. These systems can be mounted in the engine or car (with track pickups) or they can be utilized in a stationary mode with the Horn and Bell being triggered by either the train carrying a magnet or other momentary switch input. The sound systems are packaged with two reed switches. Appropriate speakers can be found on the Speaker page of this site. To make life easier, we made available the more appropriate Diesel Horns with the various prime movers. All item 9xx type sound systems listed operate via the automated Horn play patterns. Diesel and Electric systems available are listed below as well as our price schedule. They have the same physical appearance as the standard DC sound systems.

While these systems can be utilized with Radio Receivers and Stationary use, we recommend using the Standard DC types that do not have the "auto­play" feature. By utilizing a standard DC type system, the Whistle will only play as long as you keep the transmitter function or switch input activated instead of playing random Whistle patterns when activated. This enables you to play any pattern desired. For those that desire both reed switch and radio receiver use alternately or simultaneously, the "auto­play" units are necessary.

Actual footprint - 0.95" x 2.7" x 0.5"

 

INSTRUCTIONS (PDF file, 402K)

SPEAKERS

INSTALLATION RECOMMENDATIONS (PDF file, 3K)

AristoCraft (new motherboard w/ 3 connectors) to Dallee Sound (PDF, 16K)

ALCO Switcher prime mover such as: S-1, S-2, S-3, S-4, RS-1
Item#
Horn type
921
Leslie S3
922
Leslie S3K
924
Leslie A200
926
Wabco E2

EMD prime mover such as: FT, F-3, F-7, Passenger E UNITS, GP-7, GP-9, etc., also switchers
Item#
Horn type
941
Leslie S3
942
Leslie S3K
943
Nathan K-5L
944
Leslie A200
946
Wabco E2

Fairbanks Morse prime mover such as: TRAINMASTER, C-LINERS, also Switchers & Bud Cars
Item#
Horn type
961
Leslie S3
962
Leslie S3K
964
Leslie A200
966
Wabco E2

ALCO Road Engine prime mover such as: FA, FB, RS-2, RS-3, RSD, PA, PB
Item#
Horn type
931
Leslie S3
932
Leslie S3K
934
Leslie A200
936
Wabco E2


GE prime mover such as: U boats, also Dash series
Item#
Horn type
951
Leslie S3
952
Leslie S3K
953
Nathan K-5L

GE 44 Ton
Item#
Horn type
958
Hancock AW
959
Leslie A-156

EMD Class 66 Item #949

Features play of each horn pattern "De-Dar" and "De-Dar-De" via reed switch or other input.. Also features brake release with automatic "De" horn upon pulling out. Upon powering the board, an automated startup sound sequence is initiated.

For radio and other remote / DCC controls: controllable engine startup / shutdown sounds, and force N8.

INSTRUCTIONS (PDF file)

 

SOUND INDEX

 




All Content Copyright © 1976-2025 Dallee Electronics, Inc.

Privacy Policy and Conditions