Trigger Whistles, Horns, and Bells with Trackside Magnets
Two Reed Switches (One for each train side)
3 Pin UltraMiniature Connector
For Use With All HiLine™ Sound Systems
The HiLine™ Auto Whistle/Horn & Bell harness allows for track-side magnets to trigger the inputs on the HiLine™ Sound Systems. This system makes automatic sound triggering at various spots on a layout very easy.
Connect one of each reed switch to the black wire.
Connect the other side of one reed switch to the red wire.
Connect the other side of the remaining reed switch to the white wire.
Plug the UltraMiniature connector into the HiLine™ Sound System. Use the port labeled AHB or see the image below.
Verify that the field of the track-side magnets penetrates the locomotive shell and triggers the sound system.
If the magnets trigger the sound system, proceed to glue each reed switch to the train on opposing sides.