Log In | Cart
HiLine™ Auto Whistle/Horn & Bell Reed Switches & Harness - Dallee Electronics

HiLine™ Auto Whistle/Horn & Bell Reed Switches & Harness

Item Number: #1589
  • Trigger Whistles, Horns, and Bells with Trackside Magnets
  • Two Reed Switches (One for each train side)
  • 3 Pin UltraMiniature Connector
  • For Use With All HiLine™ Sound Systems

The HiLine™ Auto Whistle/Horn & Bell harness allows for track-side magnets to trigger the inputs on the HiLine™ Sound Systems. This system makes automatic sound triggering at various spots on a layout very easy.

Installation Instructions

  1. Connect one of each reed switch to the black wire.
  2. Connect the other side of one reed switch to the red wire.
  3. Connect the other side of the remaining reed switch to the white wire.
  4. Plug the UltraMiniature connector into the HiLine™ Sound System. Use the port labeled AHB or see the image below.
    HiLine™ AHB Ports Highlight
  5. Verify that the field of the track-side magnets penetrates the locomotive shell and triggers the sound system. If the magnets trigger the sound system, proceed to glue each reed switch to the train on opposing sides.

Technical Specifications

Item Number 1589
Instructions HiLine™ Auto Horn/Whistle & Bell Instructions
Package Includes
  • 1 UltraMiniature Connector Wire
  • 2 Reed Switches
Wire Length 6 Inches
Reed Switch Size 0.276" x 0.071" dia.

All Content Copyright © 1976-2023 Dallee Electronics, Inc.

Privacy Policy and Conditions