Log In | Cart
Hostler-2100 6 amp, w/remote inputs - Dallee Electronics

Hostler-2100 6 amp, w/remote inputs

Item Number: #2107
  • AC momentum throttle
  • Direction, W/H, Bell and Speed controls
  • Electronic overload protection
  • Remote on/off, W/H & Bell connections

Use your existing power transformer to power a more sophisticated AC throttle! Applies power differently to help yield better slow speed operation and better smoke at slower speeds.
This Hostler 2107 also allows for remote operation of the output as well as Whistle/Horn and Bell for use with user interaction on commercial displays.


Dallee Electronics basic Detector

The following is PRELIMINARY and will be finalized later in this month. The Hostler 2100 should also be available for sale towards the end of this month as well. Pricing will be shown at that time.



FEATURES:

The Hostler 2100 is a very unique AC throttle that allows the operator to operate at very slow speeds for great yard operation while not sacrificing full speed capabilities yielding better user satisfaction. It also contains controls for conventional operators such as Direction, Whistle/Horn, and Bell push buttons along with a SPEED control with a momentum effect. The front panel also contains LED indicators. A Green LED for power, a Yellow LED for track voltage, and a Red LED for Overload. The Hostler 2100 controls the power uniquely to the track and provides for a range of voltage from zero to full (set by the voltage of the transformer powering the throttle).

The Hostler 2100 front panel measures 7.5" X 4.5" X 2" deep and has indicators for POWER, TRACK VOLTAGE and CURRENT LIMIT, as well as a DIRECTION, Whistle/Horn, Bell push button, and a SPEED control knob. It is designed to be mounted in your control panel with four #6 screws (not included).

There is electronic CURRENT LIMIT circuitry that reacts quickly when a short or overload circuit occurs. When an over-current condition occurs, the RED LED indicator is illuminated and power to the track is turned off. The Hostler 2100 then pauses a second or so and then repeatedly checks for over-current until the condition is rectified allowing track power to be restored from zero each time.

The maximum speed of your train is set by the track voltage. Typically conventional AC type trains operate from a range of 15 to 20 volts AC. The track voltage will reflect the input voltage to the Hostler 2100. The power rating of the transformer required for the type of Hostler 2100 your powering is covered in the instructions and below.

The Hostler 2107 has a remote switch input that allows for a timer or other remote on/off control. By keeping the input contacts closed, the train will remain stopped regardless of the SPEED setting. When the input is opened, the train will gradually accelerate to the SPEED set. When the input connection is closed again, the train will gradually come to a stop and await for the next switch opening to run the train again. The Hostler 2107 also has remote switch inputs to operate the Whistle/Horn and Bell controls. By attaching remote momentary push button switches, item #618, to the Whistle/Horn and Bell inputs, the viewers can also operate the sounds in the display's running train. Of course, the engine / item operated must have a conventionally operated sound unit in it for this to work

There are various methods to operate the timed run function, one of the easiest is by using item #507 .

Technical Specifications

Item Number 365
Instructions Preliminary Hostler 2100 Instructions
Current Handling 6 Amps
Power Input (For Electronics on Detector Board) 15 Volts AC, 90 or more watts 18 Volts AC, 108 or more watts 20 Volts AC, 120 or more watts



All Content Copyright © 1976-2021 Dallee Electronics, Inc.

Privacy Policy and Conditions