Log In | Cart
Dallee Electronics Lamps/Sockets


Lamps/Sockets

IMAGE PENDING

Item #529 - T13/4 Super Bright Red LED, 19 millicandella @ 30ma typical, 30 milliamps max, 20 degree viewing angle.

 

Item #383 - 2.7 volt, 60ma, miniature lamp. Replacement lamps for regulated lighting units and other uses. (0.225" dia x 0.51" h, bright output of 0.040 M.S.C.P., 6000 hour typical life. Physical attributes are typical and may vary)


Item #532 - T1 Red LED, 200 millicandella @ 20ma typical, 30 milliamps max, 60 degree viewing angle.

LED INSTRUCTIONS (PDF file)

(scroll instructions to locate correct item number)



Item #533 - T1 Yellow LED, 15 millicandella @ 15ma typical, 30 milliamps max, 60 degree viewing angle.

LED INSTRUCTIONS (PDF file)

(scroll instructions to locate correct item number)



Item #534 - T1 Green LED, 40 millicandella @ 20ma typical, 20 milliamps max, 40 degree viewing angle.

LED INSTRUCTIONS (PDF file)

(scroll instructions to locate correct item number)

 

Item #536 - T1 (3mm) Incandescent White LED. 6000 millicandella, 2950K color temp, 20 milliamps, 45º angle viewing.

INCANDESCENT WHITE LED INSTRUCTIONS #536 (PDF file)

(scroll instructions to locate correct item number)

Item #537 - T1 3/4  (5mm) Incandescent White LED. 12,300 millicandella, 2950K color temp, 20 milliamps, 20º angle viewing.

INCANDESCENT WHITE LED INSTRUCTIONS #537 (PDF file)



Item #538 - Ballast Lamp Assembly. Includes one lamp and bayonet base.



Item #539 - Ballast Lamp (18 volt, 0.15 Amps, 2/pack).

 


Item #542 - Spedial Shape Red LED, 0.7 millicandella @ 10ma typical, 25 milliamps max. Use for engine and caboose marker lights. Front nib measures 0.079" dia. x 0.14" length, main body measures 0.196" dia x 0.177" long.

LED INSTRUCTIONS (PDF file)

(scroll instructions to locate correct item number)

 

Item #593 - DUAL COLOR RED/GREEN LED with common Anode (+). 6 millicandella @ 20 ma typical, 30 ma max, 45° viewing angle. Use for classification lights and other applicatoins. T1 (3mm) case size.

LED INSTRUCTIONS (PDF file)

(scroll instructions to locate correct item number)

 

SPECIAL NOTE REGARDING ALL OF OUR LED LAMPS

All LED's require an appropriate limiting resistor for the voltage applied. They cannot be reverse biased (i.e., place a voltage reverse of the proper polarity) or they will burn out. To prevent reverse polarity problems either place a diode or bridge rectifier in the power path. Wiring diagrams are shown on our web site. See price schedule or web site for appropriate resistors, diodes, and bridge rectifiers. Various wiring diagram's are shown with the LED's package

INDEX





All Content Copyright © 1976-2017 Dallee Electronics, Inc.

Privacy Policy and Conditions